Car cleaning and servicing tools
Foshan Aotai Automobile technical equipment Manufacturing Co., LTD
Specializing in the production of automobile maintenance testing equipment


How to use the car tire wheel balancer


How to use the car tire wheel balancer

1. Fill the tires to the appropriate air pressure, remove the lead block on the rim, remove the stones from the tire groove, and clean the rim;

2. Install the balance shaft facing the tire mounting surface, select the appropriate vertebral body, and lock the tire with the locking device. (The vertebral body must be aligned with the center hole. Otherwise the data may not be accurate.)

3. Turn on the balancer power supply, pull out the ruler to measure the distance between the rim and the balancer, the rim width, the rim diameter, and input the measured data in turn;

4. Press the start button, the balance machine starts to rotate the tire, the measurement starts, be careful not to stand near the tire to avoid danger;

5. The balance machine detects that the data is automatically stopped;

Tire wheel balancer

Contact Us

Autotai Auto Equipment Manufacturing Co., Ltd.

Factory: N.3,Jiye Road, technological & industrial zone, Lepin town, Sanshui district,Foshan

PC: 528137

Phone: +86 757 83600030

Fax: +86 757 83600031